ISO-Bar 3 Rod CoaterPrecise Coatweight Control / Efficient Design
Versatile coater capable of applying coat weights of 1 GSM (0.2 LB/MSF) to 20 GSM (4.1 LB/MSF) at speeds up to 450 MPM (1500 FPM).
Available in standard widths of:
- 1800 mm – 71”
- 2200 mm – 86”
- 2500 mm – 98”
- 2800 mm – 110”
- 3300 mm – 130″
Wide variety of options for several types of pre-metering, stripe coating and mobile mounting are available to suit a customer’s specific needs.
Custom designed models of narrower or wider widths are available for speeds as high as 1500 MPM (4900 FPM).
Configurations & Hyco Options
Hybrid Coater (Hyco) options allows selection of operation as a standard rod coater, rod coater with additional rod pre-metering on one or both sides of the applicator roll and as a stand alone thin film, rod metered applicator (WaterDeck). It is also available with dual coating heads in the same frame for simultaneously coating both sides of the web or (when used with a turnbar) two coatings on one side of the web.
STANDARD ROD COATER OPERATING IN THICK FILM MODE WITH ROD POST METERING
HYCO COATER OPERATING IN THIN FILM MODE WITH BOTH ROD PRE-METERING & ROD POST METERING
HYCO COATER OPERATING IN THIN FILM (WATERDECK) MODE ON THE SAME SIDE OF THE WEB
HYCO 90 COATER OPERATING IN THIN FILM (WATERDECK) MODE
HYCO 90 COATER OPERATING IN THICK FILM MODE ON THE OPPOSITE SIDE OF THE WEB
Depending on configuration and Hyco optional features, the ISO-BAR 3 rod coater can apply very thin films for barrier or moisture control. It can also apply thick films for color, adhesives for laminating/dual arch and/or other functional coatings.
Changeover between configurations can be accomplished in minutes. The ability to apply moisture to the bonding side of the liner and barrier or color coatings to the outside of the liner makes this coater very useful on corrugators.